VVDI Prog Read Benz Sprinter ST95P08 EEPROM Test OK

VVDI Prog Programmer can do ECU,MEU,EEROM,IMMO,Dashboard.When you read eeprom,you need 16pin locking socket.

Read the common EEPROOM, note: please insert the chip by following the below picture.

1.Benz Sprinter ST95P08

2.Connect like pic shows:

3.Start VVDI prog software,and choose Sprinter ST95P08 EEPROM type.

4.Click read.Start reading process.

5.Read successfully.

Xhorse VVDI MB BGA Tool what works and not works

No so expensive and have BGA password calculation

Vvdi MB BGA Tool  product no so expensive why not ask mi and nec prog 57 and Diagsped lower price with price between 100 and 200 euro 6000 minimum calculation Eurp password.

When this tool comes out with accepted price all ask about free password calculation

I am sure that this tool will be number 1 in market

Xhorse VVDI MB BGA Tool what works:

1. Test nec soket for reading KEY ROM 57 nô problem

just when need write not possible, via Ir Is ok

2. Test password from 212 new model super, good tool need pay 2 tokens, need 10 min all ok

3. All key lost: its only about EIS type, Xhorse Company have tested W166 W246 W212 FBS3 all key lost ok.

Sure it can do all key lost on w212 as the same as Mehaco / nec pro51 / mercedesinstrument, but cheaper.

4. MB BGA Tool support erase keyless-go rom08, and I tested it works already done 20 of them.

Vvdi MB BGA Tool Xhorse  not what works:

1. So what about w204 w207 w246, can BGA tool do all key lost?

W204 and w212 eis are different. Yea on fbs4 nothing can be made. But 2010 w212 is fbs3 .. so all keys lost sure is posible on this model..W204 facelift has fbs4 and it comes without esl / elv so another way to distinguish it.

Parts of 2014 & Mostly model of 2015 (and after 2015) is FBS4, currently can not support FBS4 type.

User can Auto detect the EIS.if can detect the type but can not read the EIS data, should be FBS4.

I use VVDI MB BGA tool test read data with obd2 210 k line working and 204 car read with obd 2 but 211 not read with obd2.

Cable connect

16 12v

4 + 5 GND

14 CAN_L

6 CAN_H

pin 1: ESL 1

pin 2: GND

pin 3: + 12V (30)

pin 5: CAN L (White)

pin 6: CAN H (Green)

pin 7: CAN L

pin 8: CAN H

CAN ANY ONE TEST

Solution:

read eis via obd for W164, W169, W211, W209, require gateway connected, I mean read while EZS is connected to the car, If you test on bench, also need to connect gateway.

Considering I can not ask customer or mechanic to send me also gateway for make a keys, in many cases MB owner send us the eis.

You can read old EIS Motorola type by K line only but not obd like 208 209 210 211 and 220 using vvdi.

Ceci est  Programmeur De Clef  du site Web du support technique  Www.diyobd2.fr : Vvdi MB BGA Tool ce qui Xhorse et non pas des Oeuvres Fonctionne