Kess V2 fw v4.036 USB Fix & USB Driver Device Free Download

Here, you will be learned what to do if Kess v2 （se87-d） clone comes across driver installation error.

Error message:

Driver installation only run on the computer they were created on

Free download:

USB FIX:

https://mega.nz/#!ko1HjBSD!YmAkIh40r1KOcISInir5rsalrOu0JS7m6b_mdKE-KhQ

(if you meet the error above, pls install USB FIX here to solve it)

Driver_USBDEVICEDRV.zip:

https://mega.nz/#!RssWibpB!TIgODLiAz7K-54z3qpw_JW5SCITb9h1-DgotCsbDrxI

How to install kess v2 driver:

Before driver installation, you should:

disable network connections;

install K-Suite 2.12,

Then begin to install kess v2 driver:

Click Next to install Driver USBDEVICEDRV 1.00.011

Click Next to begin installation

Click Finish when Driver USBDEVICEDRV 1.00.011 installation completes

Then you can run Ksuite application for auto ECU tuning.

This is from diyobd2.fr website technical support: Kess V2 fw v4.036 USB Fix & USB Driver Device Free Download

Kess v2 Ksuite v2.25 v2.28 read BMW E90 ECU successfully

Given Ksuite v2.25 and v2.28 by diyob2.fr, then follow the Kess v2 ksuite v2.25 v2.28 software installation video. Successfully read BMW ECU today.

This is the ksuite software video they offer.

https://youtu.be/GTC_hbnUdmI

k-suite installation is very easy.

Step 1 - install K-Suite v2.25

Step 2 - disable network

Step 3 - setup Ksuite properties

Step 4 - install & setup software for USB device

Step 5 - Ksuite v2.25 read BMW E90 ecu

Step 6 - setup Kess v2 v2.28 and read bmw ecu again

Kess v2 v2.25 read bmw e90 CAN ecu

K-suite v2.28 read bmw e90 ecu

Original:Kess v2 Ksuite v2.25 v2.28 read BMW E90 ECU successfully

Which clone ECU programmer can read good EDC17?

Kess v2 + Ktag read and program Bosch EDC17

Ktag, kess v2, FgTech galletto v54, MPPS V16...are all good at Bosch EDC17? Tips are here for good ECU programmers (esp. Ktag and kess) to read EDC17.

Kess v2 will programunprotectedBosch EDC17's via OBD.

If the EDC17 ECU is protected, then Ktag can be used to program in boot mode.

Some ECU's can beunlocked, in boot mode with Ktag and then programmed with Kess.

kess v2 obd reads are often partial,

Ktag reads are normally full reads.

If you want to program EDC17's then I would suggest buying Kess v2 and Ktag, together they are great tools.

KESS V2 + EDC17

KTAG + EDC17

How to rework Kess V2 hardware as the genuine

China Kess v2 also yes can be reworked like Ktag to work completely as the genuine. Here is the free solution of Kess V2 PCB rework.

TRY ON YOUR OWN RISK!

Kess v2 PCB:

Kess v2 rework:

Photo is of original board so check all others components to be as per this one.

If photo is not clear enough ...

Transistors to use :

BCR112

MMUN2113

BC817

Murata filters:

NFE61PT472C1H9L (connect ground for all of them)

Capacitors:

1uF - 35V

220uF - 10V

10uF - 16V tantalum

Fill up all holes from side to side

Use photo as reference if others components are different

Then the clone KESS V2 will also work like a charm

How to rework Kess V2 hardware as the genuine

China Kess v2 also yes can be reworked like Ktag to work completely as the genuine. Here is the free solution of Kess V2 PCB rework.

TRY ON YOUR OWN RISK!

Kess v2 PCB:

  

Kess v2 rework:

Photo is of original board so check all others components to be as per this one.

If photo is not clear enough ...

Transistors to use :

BCR112

MMUN2113

BC817

Murata filters:

NFE61PT472C1H9L (connect ground for all of them)

Capacitors:

1uF - 35V

220uF - 10V

10uF - 16V tantalum

Fill up all holes from side to side

Use photo as reference if others components are different

Then the clone KESS V2 will also work like a charm