Kess v2 Ksuite v2.25 v2.28 read BMW E90 ECU successfully

Given Ksuite v2.25 and v2.28 by diyob2.fr, then follow the Kess v2 ksuite v2.25 v2.28 software installation video. Successfully read BMW ECU today.

This is the ksuite software video they offer.

https://youtu.be/GTC_hbnUdmI

k-suite installation is very easy.

Step 1 - install K-Suite v2.25

Step 2 - disable network

Step 3 - setup Ksuite properties

Step 4 - install & setup software for USB device

Step 5 - Ksuite v2.25 read BMW E90 ecu

Step 6 - setup Kess v2 v2.28 and read bmw ecu again

Kess v2 v2.25 read bmw e90 CAN ecu

K-suite v2.28 read bmw e90 ecu

Original:Kess v2 Ksuite v2.25 v2.28 read BMW E90 ECU successfully

How to rework Kess V2 hardware as the genuine

China Kess v2 also yes can be reworked like Ktag to work completely as the genuine. Here is the free solution of Kess V2 PCB rework.

TRY ON YOUR OWN RISK!

Kess v2 PCB:

Kess v2 rework:

Photo is of original board so check all others components to be as per this one.

If photo is not clear enough ...

Transistors to use :

BCR112

MMUN2113

BC817

Murata filters:

NFE61PT472C1H9L (connect ground for all of them)

Capacitors:

1uF - 35V

220uF - 10V

10uF - 16V tantalum

Fill up all holes from side to side

Use photo as reference if others components are different

Then the clone KESS V2 will also work like a charm

How to rework Kess V2 hardware as the genuine

China Kess v2 also yes can be reworked like Ktag to work completely as the genuine. Here is the free solution of Kess V2 PCB rework.

TRY ON YOUR OWN RISK!

Kess v2 PCB:

  

Kess v2 rework:

Photo is of original board so check all others components to be as per this one.

If photo is not clear enough ...

Transistors to use :

BCR112

MMUN2113

BC817

Murata filters:

NFE61PT472C1H9L (connect ground for all of them)

Capacitors:

1uF - 35V

220uF - 10V

10uF - 16V tantalum

Fill up all holes from side to side

Use photo as reference if others components are different

Then the clone KESS V2 will also work like a charm

New Genius Master V5.05 or Kess V2 master V4.036?

With the newly released Genius Master V5.05 touch map, some people asked what it differs from Kess V2 master V4.036

Here is a comparison table made by www.diyobd2.fr engineer.

ECU programmer	New Genius K-Touch Map	Kess V2 V4.036(SE87-C)	Kess V2 V4.036(SE87-D)
Multiplexer
Language	English, Italian, German, French, Spanish, Portuguese, Hungarian	English, German, Spanish, Italian, Portuguese, French	English, German, Spanish, Italian, Portuguese, French
Software	7.06.506 Build 3029	V2.15	V2.15
Hardware	V5.05	V4.036	V4.036
Tokens	No Tokens Limitation,30 Tokens come with device by default, you can press the tokens reset button on the back of hardware to get new Tokens	No Tokens Limitation,CD comes with token programmer, you can follow our video to program tokens. No need remove chips or desolder chips	No Tokens Limitation, there is renew button on the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens.
Update	via hardware	via hardware	via hardware
Support Protocols	CAN-BUS, KWP and J1850 protocols	Line, CAN, EDC17 and MED17 and Ford J1850	Line, CAN, EDC17 and MED17 and Ford J1850
Support Vehicle	Car, Bikes, LCV Support more new vehicle than Kess V2 New Genius ECU List	Car and Bike	Car and Bike
PC	Hand-held ECU Chip Tuning Tool, no PC need; software is inside the machine already directly to use	PC-based ECU Programmer, you need install the software by yourself	PC-based ECU Programmer, you need install the software by yourself
Function and method	Read and Write ECU via OBD2 directly
Price	€426 +shipping	€ 133 free shipping	€ 225 +shipping

This is from OBD2 Francais website technical support:New Genius Master V5.05 or Kess V2 master V4.036?