,lexia 3,ca n clip
get obd2 diagnostic tools - diyobd2.fr,lexia 3,ca n clip
get obd2 diagnostic tools - diyobd2.frWhy should i buy Galletto 4, Kess v2 and Ktag together?
Kess v2, Ktag, Fgtech Galletto 4 are the top 3 ECU programmers in the market. Ever failed on some ECUs? Actually, it’s necessary to buy Kess , Ktag and Fgtech all together, especially for a pro. Reasons are listed here.
Why to buy Galletto 4 and kess v2 together?
Galletto 4 work with truck, including Benz truck, read and write ECU via both BDM and OBD; KESS not works with truck, read and write ECU via only OBD, not BDM.
Why to buy Kess v2 and Ktag together?
KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).
With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag (Ktag 2.13) you need to take apart the ECU and open it, after you can make the read/write operation.
Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.
Why need i buy Galletto 4, Kess v2 and Ktag all together?
Because non of China tool will cover all cars good and if you buy clone tools, buy all (galletto+kess+ktag)from them, that you will cover more cars, or better to buy a good original tool if you will do the work as a pro, all depends want you will do.
Reference: Kess v2 v2.22 vs Ktag v2.13 vs Fgtech v54 Galletto 4
Product | |||
Function | read and write the Data of Engine ECU | read and write the Data of Engine ECU | read and write the Data of Engine ECU |
Support Vehicles | Cars and part Bikes | cars, trucks,traktors and bikes | Car, Truck, Motorbyke, Marine |
Support Protocols | With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850 | Available Protocols for K-TAG: BDM MOTOROLA MPC5xx | NEW JTAG – BDM – MOTOROLA – FREESCALE – INFINEON |
Method | Via OBD2 | Via BDM | Both via BDM and OBD |
Update | Update via Hardware | Update via Hardware | NO |
Token | No tokens limitation | No tokens limitation | No |
Language | English, German, Spanish, Italian, Portuguese, French | English, German, Spanish, Italian, Portuguese, French | English, Italian, German, French, Spanish, Portuguese, Czech, Turkish |
EDC17 | work with a small part | work with a small part | work with a small part |
Additional remark | 1) Most customers use FGTech Galletto 4 V54. Some users prove fgtech2 v52 works 50% obd. BDM works ok and work ok with tricore and st10 micros. Fgtech galletto not disappoint them never. 2) KESS V2 has Anti-mediation lock module, it can do new and encrypted cars better than Fgtech. Remark: no one is perfect, maybe is good to have more than one tool, but much better is to have one good tool. | ||
Which Nissan Consult 3 chinese clone to buy?
Nissan Consult 3 is a professional Nissan diagnostic tool for almost all Nissan and Infiniti from 1996 to the latest in different regions worldwide. The Consult 3 is equipped with various function including simultaneous self-diagnosis of an entire system or data recorder and programming on ecu, useful not only for motorists but also for professionals. An important advantage of this product can be considered as the presence of Bluetooth, allowing you to carry out the work without any extra wires.
When buying the device, to get everything what should have this device, you should pay attention to the cost of the device and the elements mounted thereon. The correct copies must be installed processor - Renesas M32C / M30855FJ.
Then genuine Consult iii board:
Good copies of Consult 3 PCBs:
Nissan Consult 3 Bluetooth version
The bluetooth module on consult3
Consult iii without a Bluetooth module
These two versions above are the best Consult 3 Chinese clone.
To choose an alternative to the original Consult 3 makes the right choice; hope the brief description helps you. Anyway, Good luck with Chinese copies!
KTM100 fw V7.003 sw V2.13/ V2.11 ECU Programming Tool Master Use Tips and tokens reset
When the ECU tunners use Chinese KTAG KTM100 fw V7.003 sw V2.13/ V2.11 ECU programming tool master, what should they pay attention to? Please read following use tips and tokens reset method.
Chinese KTM100 fw V7.003 sw V2.13/ V2.11 use tips:
1. Do not run the original software on our hardware, otherwise the hardware may be damage.
2. Connect to the internet is safe when you run our software on our hardware.
3. KTM100 all options are gray, there are two possible reasons, you may run the original software, or the tokens are used up.
1. KTM100 can read the encrypted ECU computer, while Ktag can’t, for example one user tested Ktag V5.001 failed to read encrypted BOSCH MEV1746BMW(P171).
2. KTM100 can read the encrypted ECU computer, e.g BMW N55 N20 and BENZ
3. KTM100 and KTAG can perform CHEKSUM, while KESS V2 can’t.
What is CHECKSUM? Generally speaking, if you want to add power, firstly use KTAG/KTM100 read out the data, then edit the data, then use KTAG/KTM100 to perform checksum, finally write into ECU.
Get checksum error? How to fix? The answer is : usually, check the data via KTAG/KTM100.
How to reset KTM100 tokens?
Shown as the following picture, just press this token to reset tokens.
Use tips: press this button, meanwhile connect to the power supply. If you just press this button, but not connect to the power, it won’t work, because the factory consider the case that if you press this button carelessly, it may result in data read failure or writing failure.
KTM100 get following error message, how to fix?
Possible reason:
The file contained in the TF card is running wrong.
Solution:
Firstly download this file from http://www.chinaautodiag.com/download/ktm-tf-fix.zip, then follow video to reset.
or contact customer service lilas at e-Mail:sales@diyobd2.fr
How to install MPPS V18 software driver on Windows 7
It’s MPPS v18 windows 7 installation manual of mpps software and driver.
NOTE:
1 Mpps v18 software only supports windows7.
2 Be sure the driver installation completes, then open the mpps software to use. Otherwise, mpps can not be used.
3 Mpps v18.12.3.8 software only work mpps hardware v1.08.21 (SE134) at http://www.diyobd2.fr/
MPPS V18 download:
MPPS V18 eu clone installation steps:
Insert CD and open CD Drive (E:) MPPS V18
Copy folder “MPPS V18” to local disk C:
Open folder MPPS V18 on C: and send MPPS application to Desktop
Close the system message of driver software installation (not successful)
Open computer management to update driver software of Atm Flash
Browse driver software on computer: Computer\C:\MPPS V18\Device driver
Install device driver ATM device package
Installing...
Successfully updated driver software
Open MPPS app on Desktop
MPPS V18 languages
MPPS functions: read and write ecu
MPPS options
Mpps v18 utilities
Mpps security options
Mpps program information:
Hardware version: 1.08.21
Software version: 18.12.3.8
Car makes:
Mpps v18 car list:
MPPS V18 and Volkswagen Bora
MPPS V18 software read Audi A3 ECU id
MPPS V18 window 7 installation success!
R280 Plus BDM Programmer read write BMW CAS4 5M48H 1N35H fast
New arrival R280 Plus CAS4+ BDM Programmer is the upgrade of R270. R280 Plus read write BMW CAS4 5M48H 1N35H well and fast! And it can also help you change mileage anytime. This blog will show you how R280 Plus works.
How to install R280 Plus CAS4+ BDM Programmer?
First, find out if you car is included in R280 Plus vehicle list:
(R280 Plus programmer support BMW vehicles up to 2016)
BMW 1 series - F20, F21 chassis
BMW X1 series - E84 chassis
BMW 3 series - F30, F31 and F35 chassis
BMW X3 series - F25 chassis
BMW 5 series - F10, F11 and F18 chassis
BMW X5 series - F15 chassis
BMW 6 series - DMEM/F12 F13 chassis
BMW X6 series - F16 chassis
BMW 7 series - F01, F02, F03, F04 chassis
BMW GT series - F07 chassis
Next, here show you R280 Plus features in pictures:
R280 Plus main unit:
R280 Plus ports and switch:
R280 Plus PCB:
Then, learn how R280 Plus read& write Motorola 5M48H and correct odometer:
How R280 Plus read MCU MC9S12 5M48H?
Open R280 Plus software “R280 CAS4 In-Circuit Programmer”. Click “Read” to start read EEPROM.
After read success, you save the bin file.
How R280 Plus write MCU MC9S12 5M48H?
Click “Write” and wait it complete.
It shows “Write Success”.
How R280 Plus adjust BMW CAS4 odometer?
Click “EIS/CSA Odometer”.
It will read out the old odometer then you enter a new odometer and click “Modify Dumps”.
After that R280 Plus will show you “adjust odometer in dumps OK”, and remind you must to write the dump back. So don’t forget to click “Write”.
More details of R280 Plus you can check here: